Drives from MCG - Brushless and Brush

Servo and variable-speed drives are offered for both AC and DC input with configurations for analog command input. Brushless drives are offered for low-voltage DC inputs with single quadrant variable speed drives for brushless motors up to 360W. Brushless servo drives are offered for both AC and DC input with configurations for analog command input, while brush servo drives are offered for DC input with configurations for analog command.

B3600 Series - Variable-Speed Brushless Drive.

The B3605S and B3610S are single-quadrant PWM speed drives for commutating and controlling three-phase brushless motors. The B3600 performs closed loop velocity control via the motor Hall effect devices.

The B3605S and B3610S are suitable for a wide variety of commercial and light industrial applications such as pumps, actutaors, blowers and fans, fluid metering, textile machinery and mixing equipment where a single direction control is needed.

The drive is a single-board (2.0 x 3.5 x 0.955 in) which requires a single DC Supply input of 12 or 15-36 Vdc (jumper-selectable) in 5 and 10 amp models. Speed can be controlled via on-board trimpot, external POT or external 0-5 Vdc command. Direction of rotation option can be preset or controlled externally.

BMC Series Brushless Servo Drives.

The economical and compact BMC Series are analog 4 quadrant brushless servo drives with +/- 10 Vdc command input. All models are designed with protection against over-current, over-heating and short circuit across motor, ground and power leads. All model interface with digital controllers or can be used as stand-alone drives.

The BMC6C and BMC7D required DC power supply and the BMC12L and BMC12H operates directly off line. They are switch configurable units for 3 standard configurations - torque, velocity and open loop control.

DMC Series Brush Servo Drives.

The economical and compact DMC Series are analog 4 quadrant brushless servo drives with +/- 10 Vdc command input. The DMC Series is available in 2 models.

A single red/green LED indicates operating status. All models are designed with protection against over-current, over-heating and short circuit across motor, ground and power leads. Both models interface with digital controllers or can be used as stand-alone drives.

The DMC Series requires a DC power supply. They are switch configurable units for 4 standard configurations - torque, velocity, voltage and IR compensation model.