MOXA Web Site

Email This Page
Bookmark This Page

Industrial Media Converters

Larger Image

Datasheet (PDF)

CP-102UF Series
2-port Universal PCI serial over fiber board

The CP-102UF smart Universal PCI boards are designed for industrial automation applications that require a long distance, multi-point, PC-based data acquisition solution. The boards are compatible with all popular operating systems, and each of the 2 serial ports support data rates up to 921.6 Kbps. In addition, the CP-102UF boards work with both 3.3V and 5V PCI buses, allowing them to be installed in virtually any available PC server. With a maximum data transmission distance of 40 km (with the single-mode model), the CP-102UF cards beat the 15 meter maximum for RS-232, and even the 1.2 km maximum for RS-422/485. For many industrial applications, an even bigger benefit is that optical fiber isolates the data from dangerous increases in ground potential, ground loops, and electrical EMI/RFI electromagnetic radiation.

Features and Benefits

• Extend serial transmission distance up to:
  40 km with single-mode (CP-102UF-S)
  5 km with multi-mode (CP-102UF-M)
• Supports “Ring” and “Point-to-Point” transmission modes
• 921.6 Kbps maximum baudrate for super fast data transmission
• 128-byte FIFO and on-chip H/W, S/W flow control
• Compatible with 3.3/5V PCI and PCI-X
• Drivers provided for Windows (Vista, 2003, XP, 2000, 98, ME), WinCE 5.0, Linux, and Unix
• Easy maintenance with on-board LED display and management software
• Immune from signal interference
• Guards against electronic degradation and chemical corrosion

Larger Image

Datasheet (PDF)

TCC-100 / 100I Series
Industrial RS-232 to RS-422/485 converters with 2 KV isolation

The TCC-100 and TCC-100I are RS-232 to RS-422/485 converters that increase networking capability by extending the RS-232 transmission distance. Both converters have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, external terminal block for power, and optical isolation (TCC-100I only). The TCC-100/100I are ideal solutions for converting RS-232 signals to RS-422/485 in critical industrial environments. The TCC-100 Series also features:

• RS-232 to RS-422 conversion with RTS/CTS support
• RS-232 to 2-wire or 4-wire RS-485 conversion
• 2 KV isolation protection (TCC-100I)
• Wall and DIN-rail mounting
• Plug-in terminal block for easy RS-422/485 wiring
• LED indicators for power, Tx, Rx
• -20 to 60°C operating temperature

Larger Image

Datasheet (PDF)

TCC-80 / 80I Series
Port-powered RS-232 to RS-422/485 with 2.5 KV isolation

The TCC-80/80I provides complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. It supports both half duplex 2-wire RS-485 and full duplex 4-wire RS-422/485, either of which can be converted between RS-232's TxD and RxD lines. In addition,the TCC-80/80I's 15 KV ESD protection guards against damage from electrostatic discharge. The TCC-80I is the world's first high-speed, port-powered converter with 2.5 KV isolation. Automatic data direction control is also provided for RS-485, in which the RS-485 driver is enabled automatically when the circuitry senses the TxD output from the RS-232 signal. This means that no programming effort is required to control the transmission direction of the RS-485 signal. Moreover, the TCC-80I patented LED port power indicator can let you check if TCC-80I is receiving enough power or not.

The RS-232 port of the TCC-80 is a DB9 female socket that can connect directly to the host PC, with power drawn from the TxD, RTS, or DTR line. Regardless of whether the signal is high or low, the TCC-80 can obtain enough power from the data/handshake line. However, external power can be used if the handshake line is not available, if the serial cable is too long, or if the RS-232 device is a low power device. For external power, a 5 to 12 VDC power supply can be connected using an adaptor or a USB power cord.

And with Moxa's patented LED port power indicator, it's easy enough to test the serial device with a multimeter to determine that the serial device will provide enough power to the media converter. However, it's even easier to let the TCC-80I test the device for you. Simply connect the TCC-80I to the device's RS-232 port and set the SW4 switch to Test mode. If the patented port power LED indicator lights up, the TCC-80I is receiving enough power. If the LED does not light up, you will need to attach an external power source to the TCC-80I.

Larger Image

Datasheet (PDF)

TCF-90 Series
Port-powered RS-232 to optical fiber media converters

The TCF-90 is a compact media converter that transmits RS-232 signals over optical fiber. Power is derived from either the serial port or an external power source. The TCF-90 extends RS-232 transmission up to 5 km with multi-mode fiber, or up to 40 km with single-mode fiber. A pair of TCF-90 converters can be used to connect two RS-232 devices with optical fiber in full duplex mode. The optical fiber isolates the data signals from dangerous increases in ground potential, ground loops, and electrical EMI/RFI noise, and enhances data security by eliminating the harmful effects of RF radiation and susceptibility to electromagnetic radiation. Additional features include:

• Use either external power or power over serial
• Extends RS-232 transmission up to:
  • 40 km with single-mode—TCF-90-S
  • 5 km with multi-mode—TCF-90-M
• Reduces signal interference
• Protects against electrical interference or chemical corrosion
• 15 KV ESD protection for serial signals
• Baudrates up to 115.2 Kbps
• Compact size

Larger Image

Datasheet (PDF)

TCF-142 Series
RS-232/422/485 to optical fiber media converters

The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time. Additional features include:

• “Ring” and “Point-to-Point” transmission
  
• Extends RS-232/422/485 transmission up to:
  
  • 40 km with single-mode—TCF-142-S
    
  • 5 km with multi-mode—TCF-142-M
    
• Compact size
  
• Decreases signal interference
  
• Protects against electrical interference and chemical corrosion
  
• Supports baudrates of 300 bps to 921.6 Kbps 
  
• Wide temperature models available (-40 to 75°C)

Larger Image

Datasheet (PDF)

IMC-21 Series
Entry-level industrial 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converter

The IMC-21 industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converters designed to provide reliable and stable operation in harsh industrial environments. The IMC-21 is a cost-effective solution that runs on either a 12 to 45 VDC power input or 18 to 30 VAC power input. The IMC-21 can operate reliably in temperatures ranging from -10 to 60°C, and the rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 is easy to mount on a DIN-Rail or in distribution boxes. Additional features include:

• Multi mode, single mode with SC or ST fiber connector
  
• Link Fault Pass-Through (LFP) (media converters should work as a pair)
  
• Power inputs: 12 to 45 VDC, 18 to 30 VAC (47-63 Hz)
  
• -10 to 60°C operating temperature range
  
• DIP Switch to select FDX/HDX/10/100/Auto/Force

Larger Image

Datasheet (PDF)

IMC-101 Series
Industrial 10/100BaseT(X) to 100BaseFX Media Converters

The IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, TV, UL, and CE standards. The IMC-101 series is available in models that support an operating temperature of 0 to 60˚C, and an extended operating temperature of -40 to 75˚C. All IMC-101 series are subjected to a 100% burn-in test. Additional features include:

• 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
  
• Link Fault Pass-Through (LFP) (media converters should work as a pair)
  
• Power failure, port break alarm by relay output
  
• Redundant power inputs
  
• -40 to 75°C operating temperature range (T models)
  
• Designed for hazardous locations (Class 1 Div. 2/Zone 2)

Larger Image

Datasheet (PDF)

IMC-101G Series
Industrial Gigabit Ethernet to fiber media converter

The IMC-101G industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media conversion in harsh industrial environments. The IMC-101G's industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter comes with a relay output warning alarm to help prevent damage and loss. All IMC-101G models are subjected to a 100% burn-in test, and are available in models that support a standard operating temperature range of 0 to 60°C, and an extended operating temperature range of -40 to 75°C. Additional features include:

• 10/100/1000BaseT(X) and 1000BaseSX/LX/LHX/ZX supported
  
• Link Fault Pass-Through (LFP) (media converters should work as a pair)
  
• Power failure, port break alarm by relay output
  
• Redundant power input
  
• -40 to 75°C operating temperature range (T models)
  
• Designed for hazardous locations

Larger Image

Datasheet (PDF)

STANDARD MODBUS CONVERTER:
MGate MB3180, MB3280, MB3480
1, 2, and 4-port standard Modbus gateways

The MB3180, MB3280, and MB3480 are standard Modbus gateways that convert between Modbus TCP and Modbus RTU/ASCII protocols. Up to 16 simultaneous Modbus TCP masters are supported, with up to 31 RTU/ASCII slaves per serial port. For RTU/ASCII masters, up to 32 TCP slaves are supported.

Standard Modbus network integration. MGate MB3000 standard models include the MB3180, MB3280, and MB3480, and are designed for easy integration of Modbus TCP and RTU/ASCII networks. With these models, Modbus serial slave devices can be seamlessly incorporated into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. The MB3180, MB3280, andMB3480 offer features that make network integration easy, customizable, and compatible with almost any Modbus network.

High density, cost effective gateway. The MGate MB3000 can effectively integrate networks with a high density of Modbus nodes. The MB3280 can manage up to 62 serial slave nodes, whereas the MB3480 can manage 124. Each RS-233/422/485 serial port can be individually configured for Modbus RTU or Modbus ASCII operation or even different baudrate, allowing both types of networks to be integrated with Modbus TCP within one package.

Larger Image

Datasheet (PDF)

ADVANCED MODBUS CONVERTER:
MGate MB3170
1 and 2-port advanced serial-to-Ethernet Modbus gateways

The MB3170 and MB3270 are advanced Modbus gateways that provide maximum flexibility for integrating industrial Modbus networks of all types and sizes. They are designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master and slave combination, including serial master to serial slave, or simultaneous serial and Ethernet masters. A special priority control feature allows urgent commands to obtain immediate response. All models are ruggedly constructed, are DIN-rail mountable, and offer built-in optical isolation for serial signals as an option.

Integration of TCP masters without alteration to Modbus RTU/ASCII network or software.

The MB3270 can integrate Modbus TCP with Modbus RTU/ASCII,without modifying the existing Modbus RTU/ASCII architecture or software. With the serial redirector function, a serial master can maintain direct access to serial slave devices through a specially mapped serial port. This allows the serial and TCP masters to access serial slaves simultaneously.

Cascading Ethernet ports for easy wiring:

Advanced models of the MGate™ MB3000 series have two Ethernet ports to make network wiring easier. Dual Ethernet ports allow users to string multiple Modbus gateways together using standard RJ45 Ethernet cables, eliminating the need for a separate Ethernet switch.

Redundant power inputs:

Advanced models of the MB3000 series have dual power inputs for greater reliability. The power inputs allow simultaneous connections to two live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus gateways ideal for demanding industrial applications.

Warning by relay output:

A relay output is provided for the Ethernet link and power input status. The relay output gives maintenance engineers an additional tool for troubleshooting and maintenance.